Documentation

Call candidates from your own number

Give a recruiter a number of their own, call candidates from the browser, answer the calls that come back, and review every call with its recording and transcript.

What it is

Recruiter calling lets you phone a candidate yourself, straight from Talynce. You talk through your computer's microphone and speakers (a headset works best), and the candidate sees your Talynce number calling. The number is yours alone: an admin assigns it to you, and it becomes your recruiter line. When someone calls that number, the call rings in Talynce, on your computer and in the Talynce mobile app, and you answer it there. Every call is recorded and transcribed, and shows in the Calling Report.

Who can use it

  • Calling and answering: owners, admins and members who have a number assigned to them. Viewers can't place or answer calls.
  • Assigning numbers: owners and admins.

Where to find it

  • Assign a number: Administration → Users → a member's ⋯ menu → Edit details → Calling number; or AI Calling Agent → Phone numbers → Assign to recruiter… under a number. Admins can't edit the organization owner's details, so give the owner a number from the Phone numbers page.
  • Call: the highlighted Call button under a candidate's contact information in the candidate drawer (Pipeline and a job's Candidates tab), or next to the phone number on the candidate's profile page.
  • Answer: the Incoming call card, which appears on whichever dashboard page you have open, and in the Talynce mobile app while it's open.
  • Review: Reports → Calling Report.

Steps

  1. An admin assigns you a number (see Where to find it). Only numbers that no campaign uses can be assigned.
  2. Open a candidate and click Call under their contact information.
  3. Allow microphone access when the browser asks. If you don't, nothing is dialled.
  4. The call bar counts down for two seconds (Calling in 2…) before the candidate's phone rings. Click Cancel during the countdown and nothing is dialled; click Call now to skip it.
  5. You hear ringing while Talynce dials the candidate. The call bar shows who you're calling, the call's state and a timer.
  6. Talk. Use Mute, the noise filter button next to it and End in the call bar. You can keep working in other parts of Talynce during the call; the call bar stays.
  7. After the call, open the Calling Report for its recording and transcript.

Answer an incoming call

  1. Keep Talynce open in a browser tab, or the mobile app open on your phone. When someone calls your number, an Incoming call card appears and a ringtone plays. The card shows who is calling: the candidate's name when Talynce knows the number, otherwise the number itself.
  2. Click Answer, and allow microphone access if the browser asks. You're connected in a moment and the call bar takes over, with Mute, the noise filter and End, as on a call you placed.
  3. Click Decline to turn the call away; the caller hears a busy tone. Silence stops the ringtone without declining.
  4. If nobody answers within 45 seconds, the caller hears a busy tone and the call is logged as Missed. You get a notification, and the call shows in the Calling Report.

Good to know

  • A number is either a recruiter's line or a campaign number, never both. Once a number is assigned, AI campaigns can't dial from it and it isn't offered when creating a campaign. A number used by any campaign that isn't cancelled can't be assigned: completed and failed campaigns count, because a new applicant restarts them. Cancel those campaigns, or give them another number, first.
  • One number per person. Giving someone a new number frees their old one for campaigns. Choosing a number that is already someone else's line moves it to the new person.
  • A line is kept free for you. Calling lines are shared by every campaign and every recruiter. Talynce keeps a line free for each assigned number so you can call even while campaigns are busy. Test calls, Call again and public sample calls can still take a free line, so a call can occasionally report that all lines are busy.
  • Cost of a call you place: 0.05 credits per 10 seconds of talk time (0.3 credits a minute), counted from when the candidate answers. Calls nobody answers cost nothing. You need at least a minute's worth of credits to start a call. If your organization's credits run low during a call, you're warned two minutes before it ends, and the call ends when the credits run out.
  • Cost of a call you answer: 0.03 credits per 20 seconds of talk time (0.09 credits a minute), counted from when you answer. Ringing, missed and declined calls cost nothing. An incoming call only rings while your organization has at least a minute's worth of credits (0.09); without them it is logged as missed, and the notification says why.
  • Talynce has to be open for a call to ring. A browser tab in the background still rings. To be told while you're working in another window, allow notifications when Talynce asks. If you haven't clicked anywhere in the tab since it loaded, the browser may hold the ringtone back; the card and the notification still appear. The mobile app rings only while it's open on screen. There is no voicemail, and calls aren't forwarded to your personal phone.
  • Every tab and device you have open rings. The first one to answer takes the call and the others stop.
  • Who is calling. Talynce names the caller when the number belongs to a candidate you've called before, or one whose phone number is on their profile. A talent-pool candidate you haven't revealed shows only as a number, and a caller who hides their number shows as a private number.
  • Calls last up to 60 minutes. You're warned two minutes before the limit.
  • Only Indian mobile numbers can be called. A talent-pool candidate must be revealed before you can call them.
  • Every call is recorded and transcribed, and the call bar says so. Let the candidate know at the start of the call.
  • The noise filter is on unless you turn it off or your computer is too slow for it. It takes background noise (fans, traffic, typing) out of your microphone before the candidate hears it, so the recording is clean too. It can't remove other people talking near you, so a quiet room and a headset still help. If your voice sounds muffled, turn it off with the button next to Mute; Talynce remembers your choice in this browser. It needs a recent browser (Chrome or Edge 91, Firefox 89, Safari 16.4 or later). When it can't be used for a call (an older browser, or it didn't download in time), the browser's own noise reduction is used instead and the button says so.
  • On a slower computer the noise filter starts off. Talynce checks once in a while whether your computer can run it without delaying your voice; if it can't, the filter is off until you turn it on yourself. If your computer falls behind during a call, the filter turns itself off for the rest of that call and the browser's own noise reduction takes over, so the candidate doesn't hear you late.
  • The call bar warns you when your microphone sends no sound (We can't hear your microphone): it may be muted on your computer or headset, unplugged, or in use by another app. The candidate can't hear you until it's fixed.
  • Talynce flags calls that look answered by voicemail or a call assistant (Truecaller, a carrier's voicemail, call screening): the call bar says so, and so does the call's history. It never hangs up for you, and the call is billed as usual.
  • Cancel works until the countdown ends. Once the call has gone out, the phone company can't take it back: if you cancel then, the candidate's phone may still ring briefly, and if they answer, the line hangs up at once. The call bar tells you which happened.
  • One call at a time. If you're already on a call in another tab, the Call buttons are disabled and the call bar says the call is in another tab. Someone who calls while you're on a call hears a busy tone, and you get a missed-call notification. While a call is ringing you can't start another: answer or decline it first.
  • Keep the tab open. Closing or reloading the tab ends the call.
  • A deactivated member, or one made a viewer, keeps their number but can't call from it. The Phone numbers page shows it as Held for name. Unassign it to use it for campaigns again, or assign it to someone else.

Common questions

  • Why don't I see a Call button? You don't have a number assigned, you're a viewer, the candidate has no phone number, or it's hidden because the talent-pool profile hasn't been revealed.
  • The call says all lines are busy. Every calling line is in use right now. Try again in a minute.
  • Why can't I assign this number? A campaign still uses it, the person holding it is on a call, or calling lines haven't caught up with the numbers yet (this usually clears within half an hour; contact support if it doesn't). The message says which.
  • Can a member see other recruiters' calls? No. Members see only their own calls in the Calling Report; owners and admins see everyone's.
  • Does a missed call cost credits? No. Only answered calls are charged, by talk time.
  • Why didn't an incoming call ring? Talynce wasn't open in a browser tab (or the mobile app wasn't on screen), you were on another call, or your organization was out of credits. The call is in the Calling Report as Missed either way, and you get a notification.
  • How do I call back someone I missed? Open the missed-call notification. If the caller is a candidate in Talynce it takes you to their profile, where the Call button is.

Related articles

Last updated: 11/19/20267 views